JOMO POWER belt construction 1 | EPDM HNBR low-temperature elastomer Ethylene propylene terpolymer Resistant to aging, cold and heat 2 | Glass cord High fatigue strength under reversed bending stresses High water resistance High length stability 3 | Polyamide toothed fabric Temperature resistant PA
With strong and maintenance-free drive belts for motorcycles and scooters, JOMO helps customers avoid high repair costs. Belts retain their long service life, even in extreme applications and temperatures.
Trapezoidal tooth rubber synchronous belt Tooth type Pitch pb Tooth height ht with thick hs Angle 2B° MXL 2.032 0.51 1.22 40 XXL 3.175 0.76 1.52 50 XL 5.08 1.27 2.3 50 L 9.525 1.91 3.60 40 h 12.7 2.29 4.3 40 XH 22.225 6.35 11.2 40 XXH 31.75 9.53 15.7 40 Tooth type Pitch pb Tooth height ht with thick
The open timing belt is divided into neoprene and polyurethane two material structures. It is the best choice for a cost-effective and low-maintenance transmission system, suitable for linear motion, positioning and logistics applications. The model and specification of the rubber open timing belt a
During the production process of polyurethane timing belt, the steel wire rope is wound on the mold, which can produce the size structure suitable for different applications to meet customer requirements. In some high power or high positioning accuracy applications, molded polyurethane timing belts
Heavy-duty timing belt for high power outputs at high speeds (CXP), or for the sustained transmission of high torques at low speeds (CXA). The belt can also slip on the ribbed face if overloaded. Temperature resistant between -20°C and +100°C, depending on the application Antistatic in accordance wi
Temperature resistant between -30°C and +130°C, depending on the application Very low-noise Antistatic in accordance with ISO 9563 Moderately oil resistant Ozone resistant Resistant to aging Maintenance-free Low vibration Drive conditions and service variables in combination with time in operation c
Timing pulleys are generally made of carbon steel, and can also be processed with aluminum alloy, copper, nylon and other materials according to customer requirements; if the outer diameter of the timing pulley is greater than 250mm, cast iron is generally used. The characteristics of arc gear trans
Double-sided tooth rubber synchronous timing belts Model Pitch W T Nodal line length mm D-XL 5.08 0.508 3.05 355.6-5405.12 DL 9.525 0.762 4.58 514.35-80000.00 DH 12.7 1.372 5.95 520.70-80000.00 D-XH 22.225 2.794 15.49 1778.00-80000.00 D-T10 10 2 7 500.00-80000.00 HTD.DA-5M 5 1.143 5.26 500.00-7000.0
Temperature resistant between -20°C and +100°C, depending on the application Moderately oil resistant Ozone resistant Suitable for use in tropical climates Resistant to aging Suitable for reverse flexing/reverse tensioning idlers Maintenance-free Technical specifications Technical specifications 1.